PR-10 Accessories and Electrodes

PR-10 Accessories / P10-42 Hook
	Small improvement makes BIG difference! This hook attaches to the pull handle (P10-46 and PSH-08) and by sliding the welding head into the hook it stays in place without moving during transport. [more...] Any previous model PR-10 can be upgraded with the new handle!

Back to PR-10 main page

PR-10 Accessories / P10-45 Upper Handle Assembly
	This new innovative handle makes the PR-10 a lot easier to move around! The round tubing design wraps around the tower. It is easy to grab, push and pull from any location on the handle. The width of the handle is much wider than the earlier version which provide for greater leverage and therfore much easier to move the welder between welding jobs. [more...] Any previous model PR-10 can be upgraded with the new handle!

PR-10 Accessories / P10-45 Upper Handle Assembly

This new innovative handle makes the PR-10 a lot easier to move around! The round tubing design wraps around the tower. It is easy to grab, push and pull from any location on the handle. The width of the handle is much wider than the earlier version which provide for greater leverage and therfore much easier to move the welder between welding jobs. [more...]

Any previous model PR-10 can be upgraded with the new handle!

Back to PR-10 main page

PR-10 Accessories / P10-46 Tool Tray / Pull Handle
	P10-46 combines the existing PLU-04 Electrode Tool Tray and the PSH-08 Tower Pull Handle into one part. It now comes standard with all PR-10 and PR-10 DUO welders starting March 1 2001. The P10-46 only fit the new 3-piece front panel version of the PR-10 & DUO.
.

Back to PR-10 main page

PR-10 Accessories / PLU-03 Extension Arm Holder
	The Extension arm holder was designed for Pro Spot PR-10 series welders to store extension arm PLU-10, 15W, 20. It also stores the copper standard arm while using the extension arms. The PLU-03 features a tool tray for convenient storage of welding tips, allen wrenches etc.

Back to PR-10 main page

PR-10 Accessories / PLU-100 Pneumatic Electrode Dresser Kit
	Keeping your welding electrodes clean is an important step to ensure quality welds. Now, there is no more need to file electrodes. This Pneumatic drill cleans and sharpens electrodes with ease the same way every time! Kit comes complete with: PLT-26S Electrode Dresser PLT-26X Drill Motor PLU-05B Drill Holder H-05 Whip hose F-25 T-fitting Separate dressers and replacement blades are available.

Back to PR-10 main page

PR-10 Accessories / PLT-26 Electrode Dresser
	To help you keep welding electrodes clean and your welds strong, we now offer an electrode dresser. Electrode dresser works with all power and air tools to shape your PR-10 welding electrodes the same way every time. PLT-27 replacement blades are also available.

Back to PR-10 main page

PR-10 Accessories / P10-045 5" Casters
	A set of four, 5" hard rubber casters, for those difficult work area floors. These bigger casters make it easier to maneuver and fit on all welder bases. Two casters are without brakes (P10-045) Two casters are equipped with brakes (P10-045B).

PR-10 Accessories / P10-045 5" Casters

A set of four, 5" hard rubber casters, for those difficult work area floors. These bigger casters make it easier to maneuver and fit on all welder bases.

Two casters are without brakes (P10-045)
Two casters are equipped with brakes (P10-045B).

Back to PR-10 main page