PR-10 in Detail

PR-10 FEATURES / Automatic Weld Control
	By pressing the trigger button, the PR-10 electronically provides precise control of the squeeze time, current sensing pre-heat, weld duration, hold time, cool down and duty cycle. Within seconds, this cycle is completed and you can begin another weld. There is no possibility of an operator rushing a weld because of the pre-timed programming. The operator must wait until the green light has turned on before proceeding with the next weld. This PR-10 exclusive feature assures you of consistent, properly timed welds whether it is the first weld or the 150th weld.
.

PR-10 FEATURES / Automatic Weld Control

By pressing the trigger button, the PR-10 electronically provides precise control of the squeeze time, current sensing pre-heat, weld duration, hold time, cool down and duty cycle. Within seconds, this cycle is completed and you can begin another weld. There is no possibility of an operator rushing a weld because of the pre-timed programming. The operator must wait until the green light has turned on before proceeding with the next weld. This PR-10 exclusive feature assures you of consistent, properly timed welds whether it is the first weld or the 150th weld.

Back to PR-10 main page

PR-10 FEATURES / Hydraulic Boom Height Adjustment
	An integrated hydraulic jack system makes changing the boom height effortless. The system was designed to make boom adjustment easier. Now, simply pump the jack handle to raise the boom and release to lower it.
.

Back to PR-10 main page

PR-10 FEATURES / PR-10 Welding Head
	The Pro Spot PR-10 resistance welder features a full 360 degree rotating head that is balancer-suspended to gain access to even the most inaccessible repair areas. The welding head itself is a liquid cooled unit that houses a powerful transformer. The PR-10's unique design eliminates the need for long, energy-draining welding cables. Electrodes are attached directly to the transformer for full-strength power. A fingertip control closes the electrodes and activates the electronically controlled weld sequence. The result? Uniform, professional welds in a matter of minutes.
.

PR-10 FEATURES / PR-10 Welding Head

The Pro Spot PR-10 resistance welder features a full 360 degree rotating head that is balancer-suspended to gain access to even the most inaccessible repair areas. The welding head itself is a liquid cooled unit that houses a powerful transformer. The PR-10's unique design eliminates the need for long, energy-draining welding cables. Electrodes are attached directly to the transformer for full-strength power. A fingertip control closes the electrodes and activates the electronically controlled weld sequence. The result? Uniform, professional welds in a matter of minutes.

Back to PR-10 main page