Pro Spot Quality Welding Systems - i4, PR-2000, PR-2, PR-10

PR-10

Reliabilty & Quality that withstands the test of time.

Watch Video	Brochure	Component List	Updates
	C-X Brochure

The PR-10 Resistance Spot Welder is designed to make structural strength 6mm weld nuggets. It can produce higher quality welds than any other welder in its class. Welding with the PR-10 is easy, no heavy lifting is required since the welding head is weight balanced. Thanks to the trans-gun design with liquid cooling, the PR-10 produces over 10,000 A of weld power at the welding tips. In a sheer strength test, a single PR-10 weld holds more than 2200 lb. (1000kg). The PR-10 welds measure up to the factory requirements weld after weld.

	Extension Arms The Pro Spot PR-10 comes with a variety of extension arms to accomodate any welding job situation.
	C to X Adapter (optional) Get the best of both worlds. Now in one gun and two adapters. Transform your gun from C to X in 15 seconds.
	Electrodes The Pro Spot PR-10 comes with a variety of welding electrodes to accomodate any welding job. All Pro Spot electrodes are made of class II copper/chromium alloy for longer life and better spot welding capability.
	PR-10 Duo: Built-in MIG Welder PR-10 Duo features an easy upgrade to include a PR-155 MIG welder. It can be installed later as an upgrade package or ordered with MIG welder built-in from the factory.
	PR-10 Overhead Installation The Pro Spot PR-10 is available in an overhead ceiling-mounted version. The ceiling-mounted version hangs from the ceiling at 20' bracket spacing.

	PR-10 X-Adapter

The X-type design is used on certain applications where the C-type can’t reach. 90% of all welding needs can be done with the C-type but for some radiator support and truck bed pinch welds, the X-adapter is priceless. This new invention from Pro Spot now makes it possible to weld where you never could before!

	PR-10 Extension Arms

Pro Spot's patented extension arms are a step ahead of everyone else. Available in three different sizes, they make it possible to reach difficult areas such as back panels and core supports. Just attach the arm length and tip required for the job, rotate the arm to reach the weld area: then simply twist the arm into its "memory lock" position and begin welding.

Technical Data
Input voltage:	208V, 230V, 380V, 415V 50/60 Hz
Open Circuit Voltage:	4.5V
Output Capacity:	45KvA
Welding amperage:	10,500A
Electrode pressure:	220 DaN
Cooling system:	Water Cooled
	(weld gun and weld cables)
	(inverter, transformer, welding gun)
Duty Cycle:	Continuous (50%)
Fuse Protection:	220V-50A, 400V-32A

Features

Liquid cooled

Two sided spot welding

Weight balanced head

10,000A at the electrodes

Automatic weld control

Adjustable weld height
6mm weld nugget

Wide array of accessories and electrodes

Interchangeable arms

X-Gun Adaptive
OEM approved