PR-2 Companion

Multi-Task welding system with Mig

Watch Video | Spec-Sheet | Brochure

 


Imagine the convenience of having the MIG and PR-2 multi task welder in the same unit. Now, in one plug-in, you can do: MIG welding, fast dent pulling, stitch welding, nut and bolt welding, stretching and shrinking of metal, washer welding and moulding clip rivet welding. By having all these welding features in one unit, ready for use within seconds, you will save time and increase efficiency.


 


   

Quickest dent pulling system ever! Just weld the hammer directly on the dent and hammer away. Simply twist to release. (magnetic ground plate optional)
  

Pro Pull Dent Pulling (optional). Position the weld tip on the bottom of the dent, weld, then squeeze the handle to initialize the pulling action.
  
   

Lever bar welding. Simply weld the shaft to the dent and pull the lever to straighten.
  

Ideal for rust repair and patching, stitch welding works by delivering an intermittent or
pulsating current while rolling the tip on the sheet metal edge.
  


1. Lever Bar (optional) 2. Spot Hammer 3. Slide Hammer with Hook (optional)

4. Weld-on Shaft with Collar (optional) 5. Hammer Weight (optional) 6. Washer welding 7. Nut and bolt welding 8. Nail welding 9. Moulding clip rivet welding 10. Stitch welding


Technical Data

Input voltage:
208-230V or 400V 1 Phase
Input Cable:
30' (9.1m)
Output Amperage:
2,000A max (at electrodes)
Welding Cable:
7' (2.1m)
Shipping weight:
92lb (43kg)


 

Features

Washer welding

Nut and bolt welding

Nail welding

Moulding clip rivet welding

Stitch welding

Spot hammer dent pulling

Carbon shrinking
Contact shrinking

Pro Pull dent pulling (optional)
Built-in MIG welder


All Info Copyright © 2009 - 2011 Pro Spot International Inc.