PR-2

Multi-Task welding system

Watch Video | Spec-Sheet | Brochure

 


The PR-2 Welder is a highly a highly versatile system that allows the user to weld multiple fasteners from that came from the OEM. The PR-2 is also able to perform many single-sided welding functions such as stitch welding, washer welding, nut and bolt welding, nail welding, moulding clip rivet welding, and Pro Pull dent pulling.


 


   

Quickest dent pulling system ever! Just weld the hammer directly on the dent and hammer away. Simply twist to release. (magnetic ground plate optional)
  

Pro Pull Dent Pulling (optional). Position the weld tip on the bottom of the dent, weld, then squeeze the handle to initialize the pulling action.
  
   

Lever bar welding. Simply weld the shaft to the dent and pull the lever to straighten.
  

Ideal for rust repair and patching, stitch welding works by delivering an intermittent or
pulsating current while rolling the tip on the sheet metal edge.
  


1. Lever Bar (optional) 2. Spot Hammer 3. Slide Hammer with Hook (optional)

4. Weld-on Shaft with Collar (optional) 5. Hammer Weight (optional) 6. Washer welding 7. Nut and bolt welding 8. Nail welding 9. Moulding clip rivet welding 10. Stitch welding


Technical Data

Input voltage:
208-230V or 400V 1 Phase
Input Cable:
30' (9.1m)
Output Amperage:
2,000A max (at electrodes)
Welding Cable:
7' (2.1m)
Shipping weight:
92lb (43kg)


 

Features

Washer welding

Nut and bolt welding

Nail welding

Moulding clip rivet welding

Stitch welding

Spot hammer dent pulling

Carbon shrinking
Contact shrinking

Pro Pull dent pulling (optional)
Built-in MIG welder available (optional)



All Info Copyright © 2009 - 2011 Pro Spot International Inc.