PR-2000 Extension Arms
The Pro Spot PR-2000 comes with variety of extension arms to accomodate any welding job situation.

PS-305 is used to weld the rear tail light
PS-305:
508mm
Extension Arm
PS-503-W:
600mm Extension Arm
(optional)


 
Switching to Extension Arms
Switching between electrode arms is easy with the
PR-2000! Loosen the handle and pull off the C-Arm...
Now, insert the extension arm and tighten the handle.


 
Using Extension Arms


 

  
Using Extension Arms is easy. Just position welding head over the area to be welded; push one button to open electrodes wide, push the other button to close electrodes and weld.

Extension arms are conveniently stored at the base of the PR-2000
PS-503 is used to weld the rear panel


 
PS-52 Wheelhouse Arm


 
The Wheel House Arm allows access to hard to reach areas such as the wheel house. The unique design of the Wheel House Arm and electrodes prevents interference with the wheel house, preventing such common wheel house welding problems as arching and blowing holes.



PS-52 Wheel House Arm is being used to
weld a hard-to-reach spot on a rear window




All Info Copyright © 2009 - 2011 Pro Spot International Inc.